Soil Testings Equipments
Our product range includes a wide range of automatic cbr test apparatus, gi frame sieves 300 & 450 mm dia (powder coated), unconfined compression tester (motorised), direct shear apparatus, gyratory sieve shaker and consolidation apparatus (electronic bench model).Automatic CBR Test Apparatus
Approx. Rs 4.75 Lakh / SetGet Latest Price
Product BrochureProduct Details:| Minimum Order Quantity | 01 Set |
| Automation Grade | Automatic |
| Usage/Application | SOIL TESTING EQUIPMENT |
| Color | Blue |
| Finishing | POWDER COATED |
| Display Type | TFT TOUCH SCREEN |
| Dimensions | 480 x 650 x 1150 mm |
| Power | 370 W |
| Weight (approx.) | 110 Kg |
| Load Cell | 50 kN |
| Connection Part | 25 x 0.001 mm |
We are the manufacturer of Automatic CBR Test Apparatus. The automatic CBR test machine is designed for performing laboratory evaluation of the CBR value of highway subbases and sub-grade, and determination of the strength of cohesive materials which have maximum particle sizes less than 19 mm (3/4”). This CBR apparatus is composed of a robust and compact two column frame with adjustable upper crossbeam driven by an electro-mechanical ram with a maximum capacity of 50 kn and a data acquisition and processing system.The machine is designed to load the penetration piston into the soil sample at a constant rate to measure the applied load and piston penetration at predetermined intervals. The ram speed can be set between 0.5 mm/min to 5mm/min by using the digital readout unit. This main feature allows the user to perform tests complying to BS, EN,ASTM or AASHTO standards with the same machine.Rapid adjustment of the platen is also provided by up and down buttons which are located on the front panel of the machine. The machine is supplied complete with a 50 kN load cell, penetration piston, linear potentiometric displacement transducer (25 mm x 0.001 mm), computer software and connection cable. PC is optional.
Main Features:
- Calculates corrected CBR value at 2.5 and 5 mm
- the digital unit saves the load value at user defined displacement values such as 0.625, 1.25, 1.875,2.5, 3.75, 5, 7.5,10, 12.5 mm
- The load corresponds to the displacements corrected respect to the linear region of the data has also saved
- The % CBR at 2.5 mm and % CBR at 5 mm is also automatically calculated and save D
- Can make test with displacement and limited load control.
- Real time display of test graph.
- CPU card with 32-bit arm RISC architecture
- Permanent storage capacity up to 10000 test results
- 4 analog channels, 2 channels are active for CBR
- 1/256000 points resolution per channel
- 10 data per second sample rate for each channel
- Ethernet connecting for computer interface
- 800x480 resolution 65535 color TFT-LCD industrial touchscreen
- 4 main function keys
- Multi-language support
- 3 different unit system selection; kn, ton and lb
- Real-time clock and date
- Test result visualization and memory management interface
- Remote connection through ethernet
- USB flash disc for importing test results and for firmware
- USB printer support for inkjet and laser printers(ask for compatible models)
- Camera support for real-time video recording during test(ask for compatible models)
- Free of charge PC software for the test control and advanced report generation
The CBR test machine is supplied complete with:
- Load cell
- Penetration piston
- Linear potentiometric displacement transducer with connection part
- Computer software
- Connection cable
- Advanced report generation
Additional Information:
- Item Code: ZI-3067
GI Frame Sieves 300 & 450 Mm Dia (Powder Coated)
Approx. Rs 550 / PieceGet Latest Price
Product Details:| Minimum Order Quantity | 10 Piece |
| size | 200 mm and 300 mm |
| Material for Construction | Stainless steel |
| Shape | Round |
| Finishing | Galvanized |
| Aperture Size | 125 mm down to 20 microns |
| Type | Full Length or half length |
A sieve, or sifter, is a device for separating wanted elements from unwanted material or for characterizing the particle size distribution of a sample. This is called a Sieve Analysis (or Gradation Test) the particle size distribution of a granular material. Lab test offers a wide range of high quality testing sieves which are used in all types of sieve testing applications, from sampling and classification of soils, aggregates and other powdered and granular materials. Lab test testing sieves are of the highest quality to ensure consistent fit, accurate specifications and durable construction. Woven wire cloth and perforated plate sieves are supplied in 200 mm and 300 mm frame diameters in various nominal aperture sizes suitable for several applications and standards.Wet washing sieves are used for wet testing of various materials enabling to wash the fines through the sieve without losing any of the sample. Available in 200 mm diameter with 100 mm and 200 mm deep models. They are made with only the highest quality materials and are available in diameter sizes of 100, 200, 300 and 450 mm or in 4, 8, 12 or18 inches.
They can be supplied with aperture sizes ranging from 125 mm down to 20 microns in full or half height versions. Woven wire mesh sieves are available in frame materials of either brass or galvanized steel.
Sizes:
Available (in mm): 125, 106, 100, 90, 80, 75,63, 53, 50, 45, 40, 37.5, 31.5, 26.5, 25, 22.4, 20, 19,16,14, 13.2, 12.5, 11.2, 10, 9.5, 8, 6.7, 6.3, 5.6, 4.75,4.0, 3.35, 2.36, 1.18, 1.00. Lid receiver.ZI 3079 G. I. Frame Sieves 300 450 mm DIA (Powder Coated)
Additional Information:
- Item Code: ZI-3079
Unconfined Compression Tester (Motorised)
Approx. Rs 82,000 / SetGet Latest Price
Product Details:| Minimum Order Quantity | 1 Set |
| Display Type | Analog |
| Diameter | 38, 50, 75, 100mm |
| Capacity | 5000 kg |
| Motor drive | 1.25, 1.5, 2.5mm/min. |
| Power Supply | 230 V, Single Phase A.C. |
| Accessories | Coning tools in pairs (Male / Female) |
We are the manufacturer of Unconfined Compression Tester (Motorised). This is a motorized instrument for determining the unconfined compression strength of soil specimens. Load on the sample is applied gradually by a load frame and loads are measured on a sensitive proving ring attached to the load frame.
Features:
Comprises a screw operated load frame, with a gear box and motor drive.
Rates of strain, a pair of cone seating, adaptor for proving ring, and stain dial gauge bracket.
Supplied with one pair of male/female coning tools for38mm dia samples but without ring and dial gauge.
Additional Information:
- Item Code: ZI-3056
Direct Shear Apparatus
Approx. Rs 5.8 Lakh / PieceGet Latest Price
Product BrochureProduct Details:| Minimum Order Quantity | 1 Piece |
| Color | Blue |
| Usage/Application | SOIL SHEAR STRENGTH |
| Automation Grade | Automatic |
| Phase | 230 V |
| Material | MILD STEEL AND BRASS |
| Brand | LABTEST |
| Voltage | 230 V AC |
| Display Type | TFT TOUCH SCREEN |
| Power | SINGLE PHASE |
| Diameter | 60 MM AND 100 MM SQUARE AND ROUND |
| Reverse speed | 10 mm/min |
| Display | Digital |
| Material for Construction | Stainless steel |
The Direct Shear Apparatus covers the determination of consolidated drained shear strength of a soil material in direct shear. This apparatus is motorized and floor mounted.
Other Details:
- Supplied with carriage assembly load hanger and integral 9:1, 10:1 and 11:1 lever loading device as standard.
- The total load on the specimen can reach up to 5 kN (5000 N).
- The machine accepts 60 mm square, 100 mm square, 60mm diameter round, 100 mm diameter round and 2.5-inch diameter round shear box assemblies
- Speed range is fully stepped less variable over the range 0.00001 to 9.99999 mm/min for both direction( forward and reverse).
Additional Information:
- Item Code: ZI-3054
- Production Capacity: 3-4 MACHINE
- Delivery Time: 5-6 WEEKS
Gyratory Sieve Shaker
Approx. Rs 44,500 / PieceGet Latest Price
Product Details:| Minimum Order Quantity | 01 Piece |
| Brand | Labtest |
| Diameter | 300 mm, 450 mm |
| No. of sieves | 7 |
| Display Type | Digital |
| Material for Construction | Stainless steel |
The shaker is driven by a 1/4 H.P. Motor through a reduction gear immersed in oil. The sieve table does not rotate but is inclined from the vertical axis and the direction on inclination charges progressively in clockwise direction. If the stop pin below the table is removed, the shaker can have a rotary motion. In addition to this gyratory motion of the table, there is an upward and downward movement ensuring that each square cm of the sieve is utilized. A pair of rods and a holder can be fixed on the top of the upper most sieve, and thus the sieve set in firmly held.
Other Details:
a) Adopter for 300 mm dia. sieve available at extra cost
b) Adopter for 450 mm dia. sieve available at extra cost
Additional Information:
- Item Code: ZI-3082
Consolidation Apparatus (Electronic Bench Model)
Approx. Rs 1.8 Lakh / SetGet Latest Price
Product Details:| Minimum Order Quantity | 01 Set |
| Automation Grade | Manual |
| Accuracy | +/- 1% |
| Model | ZI 3052 |
| Automatic Grade | Manual |
| Material for Construction | Stainless steel |
We are the manufacturer and supplier of Consolidation Apparatus (Electronic Bench Model).
Features:
- The data is displayed and acquired in the digital electronic system.
Direct Shear (Motorised Twelve Speed)
Approx. Rs 92,000 / SetGet Latest Price
Product Details:| Minimum Order Quantity | 01 Set |
| Capacity | 200 kg |
| Mounting Type | Floor |
| Material for Construction | Mild steel |
| Normal Stress | 3 kg/sq.cm |
Supplied with load yoke with direct and lever system for applying load. Normal stress capacity 8 kg/sq. cm. Load is applied either directly or through a counterbalanced detachable lever. Provision is made for the load to be applied either through a steel ball recessed in the loading pad or direct through a boss on the precalibrated loading yoke. The loading unit is provided with V strips and roller strips for frictionless movement of shear box housing.
Shear Box Assembly:
- Comprising direct shear box in two halves for a square specimen size 60 x 60 x 25mm one pair of plain gripper plates
- One pair of perforated gripper plates, one pair of porous stones, one top of loading pad.
Shear Box Housing:
- Accommodates the direct shear box assembly.
- Complete with two ball roller strips.
- Specimen cutter: For cutting 60 x 60 x 25 mm.
- Specimen form larger samples.
- Set of weights to give a normal stress of 3kg/sa.cm.
Through larger as following:
- To give kg/cm. sq. Qty.
- 0.05 4 nos.
- 0.1 1 no.
- 0.2 1 no.
- 0.5 3 nos.
- 1.0 1 no.
Essential Accessories:
- High sensitivity compression proving ring.
- Cap 200kg.One consolidation dial gauge 0.01mm x 25mm and one strain dial gauge 0.01mm x 25mm
- Complete set as above but without proving ring.
- Net weight 140 kg.
Optional Extras:
- Additional set of weights to give a normal stress of 5kg/cm2.
- Soil sampler for 60mm x 60mm specimen and test forms pad of 50.
Spares:
- Porous stone for 60mm x 60mm size sample available in pairs.
- Unit is electrically operated to give the following 12rates or strains. 1.25, 0.625, 0.25, 0.125, 0.05,0.025, 0.01, 0.005, 0.002, 0.001, 0.004 and0.0002 mm/min.
- The apparatus is suitable for operation on 230 Volts Single Phase A.C. Supply
Additional Information:
- Item Code: ZI-3055
In - Situ Vane Shear Test Equipment
Approx. Rs 1.1 Lakh / PieceGet Latest Price
Product Details:| Minimum Order Quantity | 01 Piece |
| Brand | Matest |
| capacity | 2000 kg/cm2 |
| Material for Construction | Stainless steel |
| Ring dial gauge | 0.002 x 5mm |
The apparatus is designed for conducting in situ vane shear test from bottom of a bore hole in saturated cohesive deposits for determining their in place shearing resistance. The equipment consists of a torque applicator assembly mounted on a base, a gear wheel, which is marked in degrees, holds a torque ring and is geared to a crank, the torque ring is a split ring deforms as torque is applied the deformation is indicated by a dial gauge. A calibration chart to convert dial gauge readings to torque force in kgs/cm2 is supplied. A pointer is provided For registering the rotations of the vane, a detachable stand is provided to anchor the instrument an attachment to securely hold the string of rods is provided the equipments comprises of the following.
Other Details:
Torque applicator assembly capacity 2000kg/cm2 with split proving ring dial gauge 0.002 x 5mm complete with stand.
Vane ( with vane rod ) 37.5mm dia x 75mm high -1 no.
Vane ( with vane rod ) 50.0mm dia x 100mm high -1 no.
Torque rod ( square cross section) 0.6mts long -1 no.
Rods quick couplind type, 1 mtr. long -1 no.
Rods quick coupling type, 1 ½ mtr. long -1 no.
Dummy rod, corresponding to 37.5mm dia vane -1 no.
Dummy rod , corresponding to 50.0mm dia vane 1 no.
California Bearing Ratio Test (Field Type) Equipment
Approx. Rs 59,000 / PieceGet Latest Price
Product Details:| Minimum Order Quantity | 1 Piece |
| Brand | Matest |
| Dial Gauge | 0.01mm x 25mm High |
| Material for Construction | Stainless steel |
| Accuracy | +/- 1% |
In recent years it has become important to know C.B.R. values in situ. It is useful in determining the load carrying capacity in the field when in place density and water contents are such that the degree of saturation is 80% of greater, when material is cohesionless and coarse grained, such that it is not effective by changes in water contents and when the material has been in place for considerable the loading is effected by means of a mechanical load frames which can be fixed to the under side of a truck. Mechanical screw loading jack, 10,000 kg. Capacity with u-bracket and swivel head. Penetration piston, 50mm dia.Threaded at the upper end. Extension rods consisting of 2 lengths 5 cm. g lengths 10cm. 1 length 30 cm., 1 length 50cm. and 1 length 100 cm. used as spacers between the proving ring and penetration piston. The lengths are machined from steel tubing. Connector set, has eight connectors for coupling the penetration piston and proving ring assembly either directly or through extension pieces. Dial gauge support of seamless pipe constructions. It stands 30cm high and 45 cm. Wide at the base. Provided with a quick release screw type clamp capable of sliding and locking anywhere along 2 meter length of the bridge. Supplied with annular metal weight 5 kg., 250mm dia with 53mm dia central hole, slotted metal weight 5 kg., 215mm to 250mm dia with 53 dia slot 2 nos.
Accessories:
- Dial Gauge 0.01mm x 25mm.
- High sensitivity proving ring 5000kg capacity with calibration chart and carrying case.
Laboratory Vane Shear Apparatus (Motorised)
Approx. Rs 29,000 / SetGet Latest Price
Product Details:| Minimum Order Quantity | 01 Set |
| Brand | Labtest |
| rate of rotating | 1/60 R.P.M |
| Pressure | 2kgs/cm2, 4kgs/cm2, 6 kgs/cm2 and 8kgs/cm2 |
| Material for Construction | Stainless steel |
Consists of a torque head adjustable in height by means of a lead screw rotated by a drive wheel to enable the vane to be lowered into the specimen. Rotation of the vane is by means of an electrically operated rate of rotation is 1/60 R.P.M. It operates a worm gear arrangement turning the upper end of a calibration torsion spring, vane dia, rod dia, vane size vane height are as per IS specifications. The vane shaft is attached through the hollow upper shaft to are settable pointer, which indicates the angle indicates the angle of torque on a dial graduated in degree the dial reading multiplied by spring factor gives the torque a container for soil sample is also supplied a sampling tube of 38mm. i.d. 150mm long can also be used as container. Supplied with set of four springs, one each of approx. 2kgs/cm2, 4kgs/cm2, 6 kgs/cm2 8kgs/cm2 complete as above in a wooden carrying case.
Additional Information:
- Item Code: ZI-3076
Plate Bearing Test
Approx. Rs 99,000 / PieceGet Latest Price
Product Details:| Minimum Order Quantity | 01 Piece |
| Brand | Matest |
| Extension rod size | 12mm dia x 25 cm long |
| Material for Construction | Stainless steel |
| Capacity | 0 - 500KN x 0.5KN |
This is for estimating the bearing capacity of shallow foundations in situ and for the design of flexible pavement. In the test procedure a steel plate is subjected to gradually increasing load and settlements of the plates recorded. The out fit consists of50 tonne hydraulic jack with separate pumping unit fixed to it a 0 - 500KN x 0.5KN. 1No. Pressure gauge and flexible metal pipe5 mtr. long 1No. Special ball and socket arrangement between the jack and the bearing plate 1 No. Extension rod 12mm dia x 25 cm long for taking dial gauge readings 16 Nos. Magnetic base with female thread on top for holding extension rod 4 Nos. Top end plate, 50mm, dia with male thread for fitting onto the extension rod sand positioning the dial gauge plunger 4 Nos. Column 15cm dia x 25cm long with flanges complete with four bolts and nuts 2 Nos.
Column 15cm dia x 50cm long with flanges complete with four bolts and nuts 1 No. Bridge support of welded steel angle construction, 5 mtr. Span and stands approximately 30 cm. High. Fitted withtwo quick release clamps a for positioning and holding the dial bracket 2 Nos.
Other Details:
- Plane M.S. plate 60cms x 60cm .
- Square x 60 cms. Square x 25mm thick.
- Plane M.S. plate 45cm x 45cm x squarex 25mm thick.
- Plane M.S. plate 30 cms x 30 cms x 25mmthick.
- Dial Gauge 0.01mm x 25mm - 4 Nos.
Accessories:
- Plane M.S. 75mm x 25mm thick
- Plane M.S. 50cm x 25mm thick
- Grooved M.S. plate 60cms x 60cms x 25mm thick
- Grooved M.S. plate 45cms x 45cms x 25mm thick
- Grooved M.S. plate 30cms x 30cms x 25mm thick
- Grooved M.S. plate 75cms x 75cms x 25mm thick
Note:
- 1) When plates of size more than 30cm sq, are used, in order to prevent deflection of the edge, a series of smaller plates are advised to be placed concentrically on the bottom plate.
- 2) Flexible rubber pipe 1 mtr. length can be supplied for the hydraulic jack in place of metal pipe at extra cost.
- For site testing load trusses to meet the reaction of loading are available in different capacities as under.
Consolidation Apparatus (Single Gang)
Approx. Rs 35,000 / PieceGet Latest Price
Product Details:| Minimum Order Quantity | 01 Piece |
| Brand | Labtest |
| capacity | 20 kg/cm2 |
| Display | Analog |
| Material for Construction | Stainless steel |
Consolidation test is un-dimensional test considered extremely important in soil mechanics. Sample taken from adjacent areas of a single site show differential settlement even when tested using same techniques. Soil of similar strength may show varying consolidation. Samples are very carefully prepared and vertical settlement of the specimen in saturated or drained conditions carefully recorded when known load is applied.The standard outfit comprises of the following items. Loading unit, maximum capacity 20kg/cm2. Having a loading yoke connected to a lever arm with a counter balancing adjustment and having a lever ratio of 1:1 the whole assembly being mounted on a sturdy steel frame stand. The loading unit is so designed that it can be used for consolidation cells of different diameters as well as different dia floating ring type consolidation cells. Fixed ring type Consolidometer (Oedometer) cell assembly for testing 60mm dia x 20mm thick specimen comprising: Fixed ring for specimens 60mm dia x 20mm thick with guide ring.Top and bottom porous stones for 60mm dia specimen. Perforated pressure pad, channeled base with water inlet and gasket Flanged water jacket, water reservoir with plastic tube and pinch cock.Set of weights to give a pressure of 10kg/cm.sq. On 60mm dia specimen, comprising: 7 nos. 0.05 kg/cm2, 5nos. 0.1 kg/cm2, 6nos. 0.5kg/cm2, and 5 nos. 1.0 kg/cm2.Supplied complete as above but without dial gauge.
Accessories:
- Dial gauge 0.002 mm x 5mm.
- Extension piece, 40 mm long
- Consolidation test forms pad of 50 for one dimensional consolidation.
California Bearing Ratio Apparatus (BS Version Mould)
Approx. Rs 15,000 / PieceGet Latest Price
Product Details:| Minimum Order Quantity | 1 Piece |
| Dimensions | 152mm ID x 50 mm high |
| Model No. | ZI 3065B |
| Material for Construction | Stainless steel |
| Finishing | Galvanized |
Features:
- ZI 3065A CBR mould body plated steel, with both ends threaded to fit the base or collar, 152 mm ID x 127 mm high
- ZI 3065B Extension collar 152mm ID x 50 mm high
- ZI 3065C Perforated base plate
- ZI 3065D Solid base or top plate
- ZI 3065E Cutting collar
- ZI 3065F C Spanner to mount and dismount the collar from the mould body.
- Two are required for the operation.
- ZI 3065G Compaction plug with handle 150 mm x 50 mm high
- ZI 3065H Annular surcharge weight 2 kg
- ZI 3065I Split surcharge weight 2 kg
- ZI 3065J Filter paper 150 mm dia No 1 Fisherman(Pack of 100 circles)
Dead Weight Type Oil & Water Constant Pressure System
Approx. Rs 46,500 / SetGet Latest Price
Product Details:| Minimum Order Quantity | 01 Set |
| Range | 0-20 bar (0-20kg/cm2) |
| Steps of pressure | 0.5 bar (0.5kg/cm2) |
| Accuracy | +/- 0.5% |
| Electric supply | 230V, Single Phase, 50Hz, AC supply |
This device is used to maintain cell pressure constant fora long duration and the system can be used in place of conventional constant pressure system using mercury pots where certain minimum heights are required. Problems like deaeration of pump, leakage of mercury etc. is eliminated in this system . This unit is smaller in volume and can be used in mobile laboratory also. This can maintain pressure in the cell upto 20kg/cm sq. Pressure is maintained constant in the system by a balancing calibrated weights on a spindle against a column of oil, operating under constant feedback.
Construction:
- The system consists of an oil pump continuously driven byan electric motor during the test period.
- The internal components are housed in a strong compact housing.
- The piston on which weights are kept rotates with minimum friction.
- A transparent oil water vessel is provided to transmit pressure to the cell.
- A hand pump provided facilitates priming and to maintain constant pressure during power failure
- Supplied complete with pressure gauge, flow valves, connecting pressure hose and set of weights to give maximum pressure of 20 bar (20 kg/cm2)
Additional Information:
- Item Code: ZI-3061
Motorised Laboratory California Bearing Ratio Apparatus
Approx. Rs 1.1 Lakh / SetGet Latest Price
Product Details:| Minimum Order Quantity | 01 Set |
| Brand | Labtest |
| Dia | 148 mm |
| Material for Construction | Stainless steel |
We are the manufacturer of Motorised Laboratory California Bearing Ratio Apparatus.
The Apparatus Consists of:
ZI 3066A: Load Frame, 50kn ( 5000 kgf) Capacity, 3 Speeds
ZI 3066B: Mould 150mm ID x 175mm high
ZI 3066C: Perforated Base Plate for ZI3074- 2 Mould
ZI 3066D: Extension Collar, 150mm ID x 50mm high
ZI 3066E: Penetration Piston, 50mm face dia
ZI 3066F: Adjustable Bracket, for Penetration Dial Gauge
ZI 3066G: Circular Metal Spacer Disc. With detachable handle, 148 mm dia x 47.7 mm high time.
ZI 3066H: Annular Metal Weight, 2.5kg, 147mm dia with 53mm dia central hole
ZI 3066I: Perforated Metal Weight 2.5 kg. 147mm dia, with53mm dia soft
ZI 3066J: Perforated Plate, 148mm dia, with adjustable stemand lock nut
ZI 3066K: Metal Tripod for Dial Gauge
ZI 3066L: Cutting Collar
ZI 3066M: Rammer 2.6kg, 310mm controlled drop ZI 3066NRammer 4.9kg, 450mm controlled drop ZI 3066OProving Ring Capacity 50 KN
ZI 3066P: Dial Gauge, 25 mm travel, 0.01mm least count Optional Extras
ZI 3066Q: Annular Metal Weight 5 kg, 147mm dia with 53mm dia central hole
ZI 3066R: Slotted Metal Weight 5 kg 147mm dia with 53mmdia slot
Additional Information:
- Item Code: ZI-3066
California Bearing Ratio Apparatus (ASTM Version Mould)
Approx. Rs 18,000 / PieceGet Latest Price
Product Details:| Minimum Order Quantity | 01 Piece |
| Material | Plated Steel |
| Diameter | 6 In.(152.4mm) |
| Weight | 2.27 Kg |
Different Models:
- ZI 3064A: CBR mould body complete with collar perforated base plate.
- Plated Steel 6 In. (152.4mm) Dia x 7 In. (177.8mm) Height
- ZI 3064B: Spacer Disc with T handle 515/16 In. Dia(150.8mm) x 2.416 In. (61.4mm) height
- ZI 3064C: Annular surcharge weight 2.27 kg
- ZI 3064D: Slotted surcharge weight 2.27 kg
- ZI 3064E: Filter paper 150 mm dia No 1 Fisherman (Pack of 100 circles) weight 2.27 kg
Brass Frame Sieves
Approx. Rs 650 / EachGet Latest Price
Product Details:| Minimum Order Quantity | 10 Each |
| Size | 8 |
| Depth | 2" |
| Standard Perforation Size | 100, 200, 300 & 450 Mm Dia |
We are the the leading supplier of Lid Receiver Brass for sieves or Brass Frame Sieves.
Additional Information:
- Item Code: ZI-3080
Pocket Vane Shear Apparatus
Approx. Rs 46,000 / PieceGet Latest Price
Product Details:| Minimum Order Quantity | 01 Piece |
| Pressure | 0 to 1 kg/cm2 |
| Vane Diameter | 19 mm or 33 mm dia |
| Material for Construction | Aluminium |
This is an accurate and portable instrument for the determination of in-situ shear strength of cohesive soil, either on-site or on undisturbed or remoulded samples in the Laboratory. The instrument comprises of a torque head with a direct reading scale which is turned by hand. A non return pointer assists in reading. Vanes with rods are fixed to the underside of the torque head, and can be pushed well into the undisturbed material below or behind and excavated surface.
Pore Pressure Apparatus 10 Kq/cm sq
Approx. Rs 31,000 / PieceGet Latest Price
Product Details:| Minimum Order Quantity | 01 Piece |
| Brand | Matest |
| Display | Digital |
| Pressure | 10 Kg/cm sq |
We are the manufacturer of Pore Pressure Apparatus 10 KG/CM sq, This apparatus is used for measuring pore water pressure and poreair pressure in soils. This is as per the principals outlined in the book“ measurement of soil properties in triaxial tests” by A.W. BISHOP and D.J. HENKEL. This is used as an accessories for triaxial test apparatus. The apparatus consists of a panel for wall mounting on which are fitted 1.0 to 10kg/cm sq x 0.1kg cm. sq. a pressure gauge, bourdon tube type 15 cm dia.
Manometer:
- Glass u-tube manometer for measuring low positive pore pressures negative pore measures and checking zero error of pressure gauge.
- It is provided with a mercury trap (mercury supplied at extra cost.)
- Null indicator made out of clear transparent Perspex with mercury trap and cursor to indicate the mercury level.
Burette:
- 50ml burette for measuring the volume change in the soil specimen.
- Pressure pump fitted with four sleeve packed valves, operated by means of a hand wheel on the end of the piston rod which is threaded through the pump cap and gives a smooth, fine adjustment of pressure.
- Copper coil and water reservoir is fitted on board with complete stand assembly.
Consolidation Apparatus (Front Loading Type)
Approx. Rs 39,000 / PieceGet Latest Price
Product Details:| Minimum Order Quantity | 01 Piece |
| Loading ratio | 9:1, 10:1, 11:1 |
| Maximum load | 150 kg of slotted weights |
| Acceptable Cells Space | 100 cm. sq. |
Rigidly manufactured from aluminium alloy casting to provide a high degree of accuracy with any frame distortion under load. The load bridge group is supported in high accuracy self-aligning seat balls. The beam assembly is fitted with an adjustable counter balance weight. The oedometer accepts cells up to 100cm. sq. Supplied complete with rod holding the weights and coupling block holding the dial gauge or transducer.
Supplied 'without':
- Consolidation cell
- Weights, Dial Gauge (or transducer)
- Holding bench which have to be ordered separately
Sampling Tubes
Approx. Rs 450 / PieceGet Latest Price
Product Details:| Minimum Order Quantity | 3 Piece |
| Diameter size | 50mm, 75mm and 100mm |
| Blade type | 150mm auger |
| Length | 1m |
Undisturbed samples of soil at different depths can be collected using these sampling tubes. The kit includes all necessary implements for boring. Collection and sealing with wax. The operation may be carried out either using a tripod stand or without it. The equipment is supplied in a canvas bag.
Models:
- ZI 3071A Unrelieved
- (a) 150mm (b) 200mm (c) 225mm (d) 300mm long.
- ZI 3071B Relieved
- (a) 150mm (b) 200mm (c) 225mm (d) 300mm long.
- ZI 3071C Sampling outfit (heavy duty)
Extension:
- 1mtr. Long and 37.5mm diameter 5 nos.Jarring link (large) for driving samplers 50mm, 100mm or150mm dia.
- This can be connected to the sampler or tothe extension rod.
- One eye hook, one wax container, one methylated spiritstove, one wax ladle, and one pair spanners complete incarrying case.
- 150mm auger blade type, complete with handle 'T' piece and 1 mtr. long rod 1 no.
Accessories:
- Samplers for undisturbed sampling are available indifferent sizes.
- These are used with sampling outfit.
- Each sampler is 45cm long is supplied complete with two end caps, cutting nose.
- Driving head with air outlet valve and3 nos. C-spanners
- Sampler are available in 50mm dia,100mm dia 150mm dia.
- Thin walled samplers are also available in diameter 50mm, 75mm and 100mm.
- Each sampler is 60cm long and its cutting edge is hardened.
- These samplers can be used with sampling outfit 'a' drill rods by using suitable adoptors.
Posthole Type Auger
Approx. Rs 1,900 / PieceGet Latest Price
Product Details:| Minimum Order Quantity | 01 Piece |
| Extension Rod Length | 1 m |
| Color | Black |
| Type | Soil testing equipment |
Augers are used to collect disturbed soil samples at reasonable depths for laboratory tests. Augers are available in two types and each in different sizes. Blade type (post hole type) and helical type (screw type). Each auger outfit consists one each of auger head, one meter long rod, tee piece and handle. Depth of excavation can be increased using additional extension rods.
Other Details:
- ZI 3070A Auger posthole type
- (a) 50mm (b) 75mm(c) 100mm dia (d) 150mm dia
- ZI 3070B Auger screw type
- (a) 25mm (b) 38mm(c) 50mm (d) 75mm(e) 100mm (f) 150mm(g) 200mm (h) 250mm(i) 300mm dia
- Extras: Extension rod 1 meter length with threading at both ends and couplings, set of two spanners and tee piece
Soil Trimmer (Hand Operated)
Approx. Rs 21,000 / PieceGet Latest Price
Product Details:| Minimum Order Quantity | 01 Piece |
| Brand | Matest |
| size | 38mm, 50mm, 75mm and 100mm dia |
| Material for Construction | Stainless steel |
For trimming various diameter specimen for triaxial and unconfined compression tests. The lower specimen grip is mounted on a disc which rotates freely. The soil sample is mounted on the lower specimen grip and the upper grip is firmly seated on top of the specimen. The vertical guide can be adjusted to control the depth of cut. While trimming the lower disc is rotated by hand. Supplied complete with a wire saw. Trimming knife, mounted on a support, can be adjusted horizontally as well as vertically to permit trimming of the specimen to the exact size of the ring. A guide supplied prevents over cutting.
Wet Sieve Shaker
Approx. Rs 32,000 / PieceGet Latest Price
Product Details:| Minimum Order Quantity | 01 Piece |
| Voltage | 230 V A.C. Single Phase |
| Material for Construction | Stainless steel |
| Diameter | 150mm or 200mm |
This is yodar type, motor driven sieve shaker for carrying out wet sieve analysis of materials. Consists of a water reservoir and a holder for sieves, which can take up to 7 sieves of 150mm or 200mm diameter. Shaker is driven by a ¼ H.P. motor through a belt drive. Shaker mechanism moves the sieves up and down in the reservoir. The reservoir has a water out-let for draining out the used water.
Triaxial Cell
Approx. Rs 44,000 / PieceGet Latest Price
Product Details:| Minimum Order Quantity | 01 Piece |
| Material | Plastic, Glass , Steel |
| Brand | Labtest |
| leak proof upto | 10kg/cm.sq |
| Specimens Diameter | 38mm |
The cell is useful for testing 38mm dia x 76mm high soil specimen. Transparent Perspex chamber with anvil and loading plunger, the cell is easily opened by releasing four nuts of the tie rods. It is leak proof up to 10kg/cm.sq. Fluid pressure. An oil plug which can also be used as an air vent is provided for introducing a thin layer of oil over water. This provides effective sealing at the plunger for long duration tests. The cell is fitted with four sleeve packed valves of no volume change type on the base. These valves are used for cell pressure, pore water pressure, drainage or back pressure. The loading plunger of the cell has dial gauge rest.
Other Details:
Loading pad made of Perspex for 38mm dia specimens.
Pair of plain discs made of Perspex 38mm dia 6mm thick.
Pair of porous stones 38mm dia specimen.
Split sand former for 38mm dia specimen.
Sheath stretcher for 38mm dia specimen.
One dozen rubber sheaths for 38mm dia samples.
For synthetic rubber 'o' rings for 38mm dia specimen.
One plastic drainage tube.
Lateral Pressure Assembly 10kg / Cm Sq
Approx. Rs 12,500 / PieceGet Latest Price
Product Details:| Minimum Order Quantity | 01 Piece |
| Brand | Labtest |
| pressure chamber | 10 kg/cm2 |
| Pressure Indicator Type | Analog |
| Material for Construction | Stainless steel |
Lateral Pressure Assembly 10kg / Cm Sq It is designed for application of cell pressure upto 10kg/cm2 on a triaxial specimen in the triaxial cell. The unit is mostly used in routine tests which last for about 10 to 15 minutes wherein the variations of cell pressure can be tolerated. The apparatus consists of a pressure chamber which has a flanged top capfitted with a 10 kg/cm2. Pressure gauge and a valve for pumping in air.Water inlet and drain cock are fitted to the chamber.The foot pump supplied easily develops a pressure of 10 kg/cm2 Complete with connecting pressure hose.
Note:
- Also available 20Kg/cm2
Additional Information:
- Item Code: ZI-3062
Swell Test Apparatus
Approx. Rs 39,000 / PieceGet Latest Price
Product Details:| Minimum Order Quantity | 1 Piece |
| Capacity | 50 kN |
| Material for Construction | Stainless steel |
| Diameter | 100 mm |
| Thickness | 12.7 mm |
It is designed to determine the swelling pressure developed by soil specimens moulded to desired densities at knows moisture contents when soaked in water. The load applied to restrain the swelling is transferred to a load measuring proving ring through a perforated swell plate and a load transfer bar. The proving ring is attached to the lead screw of hand operated load frame. A soaking tank is provided for saturating the specimen and the base of the mould has channels and radial grooves with connecting holes it consists one each.
Other Details:
- ZI 3069-1: Load Frame, Hand Operated, Capacity 50 KN (5,000 kgf)
- ZI 3069-2: Mould, 100mm dia x 127.3mm height (1,000ml volume)with base plate and collar
- ZI 3069-3
- Proving Ring, with integral boss, high sensitivity 2.5KN(250 Kgf) capacity
- ZI 3069-4: Dial Gauge , 25 mm travel, 0.01mm least countLid receiver in G.I. frame for 300 mm dia x 450 mm diasieves
- ZI 3069-5: Perforated swell plate, 100 mm dia x 16 mm thick
- ZI 3069-6: Spencer, 100 mm dia x 12.7 mm thick
Constant Volume Mould
Approx. Rs 7,000 / eachGet Latest Price
Product Details:| Minimum Order Quantity | 2 each |
| size | 38 mm x 76 mm |
| Accessories | Split mould 38mm dia x 76mm long and split mould 38 mm dia. x 86 mm long |
| Material for Construction | Stainless steel |
| Type | Die Casting Mould |
Often in the laboratories it is required to quickly prepare remoulded soil specimen for Triaxial and Unconfined Tests. Constant volume moulds are used for this purpose, using either dynamic or static compaction. The moulds are available indifferent sizes .
Other Details:
ZI 3048A: For specimen size 38 mm x 76 mm long comprises Split mould 38 mm dia x 126 mm long.
End plug 38 mm dia x 25 mm long pair.
Split collar interchangeable.
Ejecting plunger 38 mm dia x 126 mm long.
ZI 3048B: For specimen size 50 mm dia x 100mm long specimen comprises of Split mould 50mm dia x 178 mm long.
End plugs 50 mm x 39 mm long pair.
Universal Extractor Frame (Screw Type)
Approx. Rs 8,500 / PieceGet Latest Price
Product Details:| Minimum Order Quantity | 01 Piece |
| Brand | Matest |
| diameter | 38mm, 75mm, 100mm,150mm |
| Material for Construction | Stainless steel |
| Automatic Grade | Manual |
Designed to extract specimens from almost every type of sampling tube and mould used in solid engineering laboratory or in the field. It can be mounted vertically or horizontally as desired. It has an unique feature that three 38mm dia sample. Comprises of a frame designed for screw jack operation, one each of the adaptors for 38mm, 75mm, 100mm,150mm dia meter specimens and a stand to obtain simultaneously three 38mm diameter samples from one100mm diameter sample. The adaptor plate which slides along the slotted support can be claimed at any desired position by means of locking nuts. Besides this, the tube or mould can be held in position by raising the tube guides and held in position with locking screws. The lead screw movement can be stopped at any predetermined position by tightening the lead screw collar.Plunger adaptor for 200mm dia samples. Adaptor plate with 200mm dia hole and device to extract b number 38mm dia samples.
Additional Information:
- Item Code: ZI-3046
Sieve Brushes
Approx. Rs 275 / PieceGet Latest Price
Product Details:| Minimum Order Quantity | 06 Piece |
| Brush Head Shape | Flat, Round |
| Size | 1''-2 |
| Bristle Material | Animal Hair, Carbon Fiber, Nylon |
| Handle Material | Plastic, Wooden |
Models:
- ZI 3084A Bristle round brush 30 mm.
- ZI 3084B Nylon sieve brush 33 mm.
- ZI 3084C Soft Hair brush 3 mm dia.
- ZI 3084D Double ended brass nylon bristle.
- ZI 3084E Double ended nylon sieve brush
Additional Information:
- Item Code: ZI-3084
Motorised 30 Speeds Load Frame
Approx. Rs 1.05 Lakh / PieceGet Latest Price
Product Details:| Minimum Order Quantity | 01 Piece |
| Rates of Strain | 30 fixed speeds between 0.00048 mm/min and 6.00mm/min. |
| Power Supply | 220 V, 50 Hz, single phase, AC |
| Material for Construction | Stainless steel |
| Finishing | Paint Coated |
The Load Frame consists of a cabinet which houses the gear system and motor with sturdy angle iron frame. the loading is done through the bottom loading platen, which is carried on a lead screw, which advances upwards. the top load bracket, which slides over two upright pillars, can be positioned at any desired height and locked. It carries a screw adapter for standard Proving rings and Load Cells. The loading part of the unit is detachable from the main unit for ease of transport and to avoid damage to the tension rods.
Features:
- Two pillar type
- Detachable Frame
- Enclosed motor and gear system
- Jewel lamps indicating direction of motion
- Operational ease
- Useful for Triaxial and CBR Tests
Additional Information:
- Item Code: ZI-3063
Water Testing Kit
Approx. Rs 1,800 / SetGet Latest Price
Product Details:| Minimum Order Quantity | 01 Set |
| Storage | 2 Degree C - 30 Degree C |
| No.of Tests/pack | 200 |
| Type | C |
Features:
- Acidity Testing Kit
- Chloride Test Kit
- Hardness Test Kit
- Sulphate Test Kit
- Alkalinity Test Kit
- Range: Can be customized
- Application: Water test kit
Additional Information:
- Item Code: ZI-3042
Drop Hammer And Guide Pipe Assembly
Approx. Rs 15,000 / PieceGet Latest Price
Product Details:| Minimum Order Quantity | 01 Piece |
| Color | Black |
| Free fall | 75cm |
| Weight | 65 Kg |
We are the leading manufacturers and suppliers of Drop Hammer And Guide Pipe Assembly made from supreme quality material.
Earth Resistivity Meter
Approx. Rs 13,000 / PieceGet Latest Price
Product Details:| Minimum Order Quantity | 01 Piece |
| Earth Resistance | 0 - 2 0 W / 0 -200W/0-2000W |
| Earth Voltage | 0-200V AC (40-500Hz) |
| Measuring current | 2mA |
Features:
- Capable of measuring earth voltage (V A.C.)
- It permits the testing of earth resistance without tripping earth leakage current circuit breakers in the circuit.
- Auto power off function.
- The timer operates auto function.
- The time operates the "Push Button Switch" and "Timer On Button' are pressed together.
- This will keep the test "no" for about three to five minutes. Then auto power off
- Battery operated
- Data hold function
- Small and light weight
- IEC 1010 CAT III 200V
- Calibration performed with supplied test leads
Split Spoon Sampler
Approx. Rs 8,500 / PieceGet Latest Price
Product Details:| Minimum Order Quantity | 01 Piece |
| Capacity | 65 Kgs |
| Material for Construction | Stainless steel |
| Cutting edge dia | 35 mm |
This is used for standard penetration test for determining penetration resistance (N valve) of soil which can be related to unconfined compressive strength. Penetration resistance (N value) of soil is determined by giving a number of blows with a 65 Kgs weight falling through a given distance of 75cm required to penetrate the assembly to a depth of 30 cm when properly seated on the ground. The sampler is made from a steel tube split length wise held together by a head fitted with a ball check valve a hardened steel shoe in size cutting edge of 35 mm dia.
Other Details:
- ZI 3072 Split spoon sampler The sampler is 35 mm i.d. 50.8mm in outer dia 508mm long.
- One adopter to connect 'A' type drill rods is also supplied.
- Spares: Body of split spoon sampler, shoe of split spoon sampler, head of split spoon sampler.
Volume Change Gauge
Approx. Rs 18,000 / PieceGet Latest Price
Product Details:| Minimum Order Quantity | 01 Piece |
| Material | Steel |
| Model | Zi 3060a single burette, zi3060b single burette,zi 3060c twin burette |
| Capacity | 10 ml,25 ml,50 ml |
| Divisions | 0.05 ml,0.1 ml,0.2 ml |
We are the leading Exporter and Supplier of Volume Change Gauge
Features:
- ZI 3060A: Single burette, 10ml capacity, graduated in 0.05 ml division.
- ZI 3060B: Single burette, 25ml capacity,graduated in 0.1ml. Division.
- ZI 3060C: Twin burette, 50ml. Capacity graduated in 0.2 ml divisions.
- The unit consists of two glass graduated burettes of 50ml. 0.2ml.
- Capacity enclosed in two Perspex tubes sealed by two end caps
Explore More Products
Zeal International
New Delhi - 110002, Delhi, India
© Zeal International. All Rights Reserved (Terms of Use)
Developed and Managed by IndiaMART InterMESH Limited