Zeal International

• RCPT apparatus is a fully self-contained test device complete for Rebar manufacturers
• Civil engineering laboratories and R D purpose as per ASTM C1202, AASHTO T277 and ASTM C 1760. F1760

• RCPT test apparatus with 4 port
• Plexiglass chambers - 4 pairs
• 300mm vacuum desiccator
• Vacuum pump with gauge
• Moisture trap
• Temperature probe
• Tests sealant + gun acrylic sealer + brush

The Instrument is used for determination and checking of Bitumen percentage in Bituminous mix, the mix is added with a solvent and dissolved bitumen is removed by centrifugal action. Consists of a removable Aluminum rotor bowl. With a cap and tightening nut. The bowl assembly is mounted on a vertical shaft, which protrudes from a cast housing. This shaft and thus the bowl is rotated fast manually by enclosed gears in the cast body and handle. Solvent is introduced during the test through the holes in the cap of the housing. A drain is provided to collect dissolved Bitumen coming out of the rotating bowl and getting collected in the housing.

• ZI 4004 Fraass Breaking Point Apparatus
• ZI 4004-A Stainless Steel Plaque
• ZI 4004-B Frass Apparatus (pack of 10) Dry ice maker

• Pyrex beaker 800 cc capacity for sample heating.
• Microprocessor control with automatic programmable test sequences for water or glycerol
• RS 232 serial port for connection to PC or printer
• Color large TFT graphic display with touch screen
• Electric lifting system
• PID controlled heating system
• Cooling system with solenoid valve control
• Magnetic stirrer with adjustable speed
• Digital light barrier system determines exact softening point of bituminous sample
• Software controlled system allows select test parameters, store and retrieve test results.

• Date/Time, operator name, test number
• Test parameters conforming the type of test: 80°C and 80-150°C
• Preheating temperature and thermocouple calibration for measuring the heater temperature
• Magnetic stirrer speed adjustment from 10 to 150 rpm.
• Baud rate selection for PC and for printer Safety Features
• Heater is automatically shut down at the end of the test cycle and cooling media and a solenoid valve is automatically opened by the controller.
• Automatic test interruption when there is a probe failure or when the probe is not positioned properly

• Double walled construction outer body made of M.S. Duly Aluminium/Stainless Steel Chamber having 60-75mmglass wool insulation, door with glass window for observation of sample without disturbing.
• The door is fitted with heavy chrome plated hinge.
• Provided with adjustable Steel/Aluminium/Wire mesh tray.
• Temp is recorded means of “L” shaped Prismatic glass
• Thermometer fitted at the front of the cabinet Temperature controlled by Hydraulic type Bi-Metallic Capillary Thermostat, having adjustable air ventilators on both sides.

• Heating element are made from high grade (Kanthal)Resistant wire.
• Heaters are fitted/wound along all sides bottom.
• Complete with 2 pilot lamp cord plug pin etc.

• 300 x 300 x 300mm 2 500W 28
• 350 x 350 x 350mm 2 500W 45
• 450 x 450 x 450mm 2 500W 95
• 450 x 450 x 605mm 2 750W 125
• 605 x 605 x 605mm 2 1.0 kW 224
• 605 x 605 x 900mm 3 1.0 kW 336
• 605 x 450 x 900mm 3 1.0 kW 252

• Air circulation can be fitted in all the above size at extra cost.
• Digital Temp. Controller/Indicator can be fitted with air circulation system at system at extra cost if required.
• Alarm system if required can be fitted against order.
• Deluxe Model with Thermostat heavy Gauge Inside/ Outside chamber.

Features:

Loaded on the specimen by means of a lever to give

A dial gauge is provided to record the penetration of pin into the specimen

Applications:

Used for estimation of moisture in lubricating oil as per with one 10 cc (ml) receiver fitted with stop cock, 1000 ml Round Bottom Flask & clamp with stand. Complete with Heating unit