Ultrasonic Pulse Velocity Tester

We are a leading Exporter of portable ultrasonic pulse velocity tester, labtest ultrasonic pulse velocity tester and ultrasonic pulse velocity tester from New Delhi, India.

Portable Ultrasonic Pulse Velocity Tester

Request Callback

₹ 105000 / Piece Get Latest Price

Product Brochure
MaterialPlastic BODY
Capacity20 ton
Usage/ApplicationCONCRETE NDT TESTING
Voltage210 V
SizePORTABLE
BrandMATEST
Frequency55 KHZ
PowerAA X 4 rechargeable Duracell 2500 mAH
InterfaceMini USB
DisplayDigital

Minimum order quantity: 1 Piece

We are the manufacturer of Portable Ultrasonic Pulse Velocity Tester. Ultrasonic measurements are used in structural engineering to determine material properties, detect defects and assess deterioration by measuring transit time and transit velocity of the member.

Features:

Measurement of the required time by the ultrasonic pulse to go through the tested material.Single or continuous acquisition mode with automatic or manual saving.Zero calibration with depuration of the time for the pulse to go through the probes.Calibration of a defined time value.Interface mini USB for PC connection.Two outlets for connection to the oscilloscope.The use of the instrument is made easy because it is based on the user-friendly system.

Labtest Ultrasonic Pulse Velocity Tester

Request Callback

₹ 105000 / Piece Get Latest Price

Pulse Frequency54 kHz
Velocity Range1000-6000 m/s
Display TypeLCD
Power SourceBattery + Mains
Transducer TypeDirect
Operating Temp-10 to 50 °C
BrandLabTest
The velocity of ultrasonic wave in concrete is affected by elastic property or strength. Ultrasonic applies high voltage and sends it to transit transducer to generate ultrasonic wave. This ultrasonic wave reaches to the receive transducer through concrete. When elastic property or strength of concrete is high, the transit time is short. On the other hand, when the materials are contrary, the velocity is low. Ultrasonic measures the ultrasonic transit time accurately so it makes possible to evaluate a material or find an elastic properties nondestructively to investigate uniformity, cavities, cracks, fire/frost damage, delaminating, deterioration and strength. We use 52 khz concrete transducers which was designed to send and receive ultrasonic signal effectively in highly attenuative materials, including concrete, wood, stone and plastic. This instrument was developed by cooperative research with research institute of standard science, subsidized from the national coffers of ministry of science technology. This is the 4th generation.

Ultrasonic Pulse Velocity Tester

Request Callback

₹ 105000 / Piece Get Latest Price

Product Brochure
BrandLabtest
Battery packLi-Ion 11,1V 3000 mA/per hour
DisplayDigital
AccesoriesExternal feeder 230V/24V and battery charger
Body MaterialPlastic

Minimum order quantity: 1 Piece

Ultrasonic pulse velocity tester, “high performance” with microprocessor for combined ultrasonic and rebound hammer data acquisition and processing. This is an instrument using the most modern technologies, it has a 1⁄4 VGA colour touch screen, 64 MB, Compact Flash interface, SD card, USB, RS232, RS485, working system Windows CE with the possibility to manage, EXCEL, WORD, PPT files etc.

Ultrasonic tests:

  • The appliance allows measuring the ultrasonic impulse speed inside the material (by knowing the distance between the probes).
  • It measures the distance between the probes (by knowing the speed of the ultrasonic impulse to go through the tested material).
  • It measures the required time by the ultrasonic impulse to go through the tested material.
  • Young’s modulus is also measured (by knowing the distance between the probes and the density of the tested material). Calculation of the crack depth.
  • Zero calibration with depuration of the time for the impulse to go through the probes.
  • Calibration of a defined time value.

Advance function for research purposes:
  • Selection of the transmission frequency of the impulse.
  • Selection of the impulse amplitude.
  • Infinite filing capacity of the test dates and the graph tracing of the tests on SD card or Compact Flash extractable and expandable.
  • RS232 or RS485 or USB interface for PC or printer connection.
  • Time measuring from 0 to 9999, 9 μS Resolution: 0,1 μS
  • Possibility to use the instrument with two exponential probes, or with one standard probe and one exponential probe
  • The use of the appliance is made easy because it is based on PC and Windows CE way of working, it allows using the user knowledge of the classic personal computer and its software’s
  • Possibility to connect the instrument to internet for consultations or extractions, like a common PC
  • Possibility to visualise the shape of the transmitting wave while it goes through the material checked, by transforming the instrument into a real oscilloscope with the option “Scope” mode


Other Details:

  • Combined ultrasonic and rebound hammer determination (sonreb method): The ultrasonic tester houses an integral data logger for data acquisition, processing and store of rebound hammer values
  • The acquisition of the rebound values is performed with manual or automatic mode
  • Manual mode: Rebound values measured with a standard concrete hammer are manually input into the ultrasonic Tester
  • Automatic mode: The digital test hammer model is directly connected to the ultrasonic tester through a cable
  • The measures of the velocity of ultrasonic pulses and the rebound values are automatically stored and processed, giving estimates of dynamic modulus of elasticity and Poisson’s Ratio, and providing information’s on possible voids, cracks and strength of the structure.Through mathematical formulas it is possible to evaluate the compressive strength of the concrete, useful to estimate formwork striking times
  • The combined test allow to rectify different inaccuracies that are typical of the simple rebound hammer test, and obtaining estimates on the compressive strength of the concrete, that cannot be obtained with the ultrasonic test, granting high accuracy and reliability of the results


The standard appliance includes:

  • Instrument in basic configuration (x-scale 400MHz, 64MB Flash Memory, 64 MB Ram) in a practical and elegant palmer container
  • Two 55 kHz probes with connecting cables
  • Calibrating cylinder and contact paste
  • Strong anti-shock case holding the instrument and the accessories.

Ultrasonic Pulse Velocity Tester

Request Callback

₹ 105000 / Piece Get Latest Price

Product Brochure
BrandLabtest
Country of OriginMade in India
concrete transducers52 khz
DisplayDigital
Body MaterialPlastic

Minimum order quantity: 01 Piece

The velocity of ultrasonic wave in concrete is affected by elastic property or strength. Ultrasonic applies high voltage and sends it to transit transducer to generate ultrasonic wave. This ultrasonic wave reaches to the receive transducer through concrete. When elastic property or strength of concrete is high, the transit time is short. On the other hand, when the materials are contrary, the velocity is low. Ultrasonic measures the ultrasonic transit time accurately so it makes possible to evaluate a material or find an elastic properties nondestructively to investigate uniformity, cavities, cracks, fire/frost damage, delaminating, deterioration and strength. We use 52 khz concrete transducers which was designed to send and receive ultrasonic signal effectively in highly attenuative materials, including concrete, wood, stone and plastic. This instrument was developed by cooperative research with research institute of standard science, subsidized from the national coffers of ministry of science technology. This is the 4th generation.
X

Contact Us

Taran Sethi (Sales & Marketing Manager)
Zeal International
2nd Floor, 4/20, Kirti Nagar Industrial Area, HP Petrol Pump
New Delhi - 110015, Delhi, India

Get Directions
Send Email
Share: